Tire Machine |
Oil Change
Changing oil in your car is quite easy if you know what you are doing. The first step of your oil change is gathering supplies. You will need oil, rags, oil filter, oil drip pan, funnel, oil filter wrench and crescent set. Next, you will need to let your car warm up for five minutes which will get the oil hot so it will flow easier. Next, you will want to get the appropriate wrench out of the crescent set and remove the plug in the bottom of the oil pan. Watch out the oil is hot and can burn you. Make sure that the oil drip pan is under the hole to catch the oil as it drains from the engine. It is also important to replace the oil filter. Once all the oil has drained out of the car use the oil filter wrench to remove the oil filter. WATCH out there might still be some hot oil in the filter. Now you need to open one of the new quarts of oil, dip your finger in the oil and lubricate the seal on the new oil filter before you screw the filter on hand tight. MAKE sure that you put the plug back in and then now you can start to add oil to the oil fill pipe. You will add as many quarts of oil that is called for by your car . Once you're done with that you will pull the dipstick and check the oil. Then you will put the dipstick back in then you can start the car and check the oil pressure. If everything checks out you can proceed with cleanup and your oil change is complete. |